Single Effect Evaporator

Long Tube Single Effect Evaporator Are Usually Used For The Concentration Of Foamy Liquids.

Evaporation Deals With The Concentration Of A Non-Volatile Solute From A Solution By The Removal Of Required Amount Of Volatile Solvent. Usually, The Solvent Is Water.

Description

Long Tube Single Effect Evaporator Are Usually Used For The Concentration Of Foamy Liquids.

Evaporation Deals With The Concentration Of A Non-Volatile Solute From A Solution By The Removal Of Required Amount Of Volatile Solvent. Usually, The Solvent Is Water. By Vaporizing A Part Of The Solvent, Useful Product I.E. The Concentrated Solution Or Thick Is Produced And The Vapour Is Discarded. Long Tube Single Effect Evaporators Are Usually Used For The Concentration Of Foamy Liquids. The Set-Up Consists Of Stainless Steel Tubes Surrounded By A Stainless Steel Jacket And Fitted With Accumulator. Dilute Solution Is Feed To Tubes. Steam From A Steam Generator Is Supplied To Shell To Concentrate The Dilute Feed Solution To A Desired Level. The Jacket Is Fitted With A Steam Trap And The Condensate Is Collected At The End Of Trap. The Vapours Of Volatile Solvent Are Condensed In A Shell Tube Type Condenser And The Balance Non-Volatile Solute Collected In The Accumulator Is Recycled Through The Evaporator.

Learning Objectives / Experiments:

      • To Concentrate A Solution And To Evaluate The Following At Steady State
      • Material And Heat Balance
      • Economy And The Capacity Of The Evaporator
      • Overall Heat Transfer Co-Efficient

Technical Specifications:

      • Evaporator : Material Stainless Steel
      • Shell Dia – 75mm, Length – 750mm
      • Tubes Dia – 12mm, Length – 750mm
      • Feed Circulation : By Gravity Feed
      • Feed Tank: Material Stainless Steel, Capacity 25 Ltrs
      • Flow Measurement: Rotameters (One Each For Feed Cold Water)
      • Steam Generator: Made Of Stainless Steel Provided With Pressure Gauge Level Indicator, Safety Valve And Drain Etc Insulated With Ceramic Wool And Cladding With Aluminium Foil
      • Piping: Stainless Steel And Pvc, Size ¼”
      • Condenser: Shell Tube Type Made Of Stainless Steel
      • Bottom Product Tank: Made Of Stainless Steel, Capacity 10 Ltrs
      • Water Supply Tank: Made Of Stainless Steel, Capacity 50 Ltrs For Condenser
      • Pump : Fhp Capacity
      • Heaters: Nichrome Wire Heater
      • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

Control Panel:

      • Digital Temp Controller: 0-1999°c, (For Steam Generator)
      • Digital Temp Indicator: 0-1999°c, With Multi-Channel Switch
      • Temp Sensors: Rtd Pt-100,
      • Standard Make On/Off Switch, Mains Indicator Etc

Scope of Delivery:

      • 1 Self Contained “Single Effect Evaporator” Apparatus
      • 1 Instruction Manual consisting of experimental procedures, block diagram etc

Reviews

There are no reviews yet.

Be the first to review “Single Effect Evaporator”

Your email address will not be published. Required fields are marked *